|
Halloween props Switch Mat Control (pneumatic, animated, pressure, floor)
Use this switch mat control on one of your
Halloween props. Plug in your 110v AC prop into the controller and the controller into a 110v AC power source. Power is delivered from the power source to your prop when pressure is applied to the MAT
(stepped on). Power is cut once pressure is removed from the MAT (stepped off).
The switch mat comes with a controller and mat with approximately 10 foot of cord (mat to control).
Your prop is powered by 12v or 24v DC? No problem, just use a wall wart (transformer), plugging it into the output of the control.
Disclaimer: The use of the motion control/sensor is at the
user's sole risk. By building the motion control/sensor, the maker understands that the motion control/sensor is intended for educational purposes only and any use of the product is at the user’s own
risk. The owners of this website shall not be liable for any damages or personal injury from the use of the motion control/sensor.
|
